Appliance Repair Help
Quality Factory Appliance Parts
Quality Appliance Service
:: GE Refrigerator Water Filter 2 Pack
:: MWF2 2 Pack
:: Factory Authorized Parts
:: Same Day Shipping
:: Most Parts In Stock
:: Call Toll Free Today!
:: Same Day Service
:: 90 Day Labor Guarantee
:: Free Online Repair Help
:: Over 15 years Experience
:: Professional & Courteous
Thank you for the way you handled my
microwave repair. I can see you are in
business to build relationships and can
look past the short term. I will not hesitate
to refer you to my friends and family.
Thank you again for your helpfulness. We
certainly recommend the quality and
helpfulness of your work and the integrity
of the way you do it, every chance we get.
Cleaning out the lint build up inside your
dryer is very important. The accumulation
of lint can catch fire and spread to your
home. The lint will also act as insulation
on your motor and cause premature
failure. All dryers and there vents should
be cleaned at least once a year. Doing
this will keep your family safe and your
A very common complaint I get, is that the dryer runs but will not heat. One
possible cause for this is that the dryer overheated and the thermal fuse opened
as a safety. The thermal fuse is not resettable and will have to be replaced.
You will also have to look for causes of the dryer overheating. These causes
generally consist of a bad thermostat, plugged dryer vent, or plugged dryer lint
chute. Although these are the most common causes, other factors could be to
blame, including the timer.
Heres how to check for an open thermal fuse.
1. Unplug dryer.
2. Disconnect dryer vent and gain access to the back of the dryer. Shut off gas
if a valve is available behind dryer.
3. Remove the 1/4" machine screws fastening the back panel to the dryer.
There should be 9 of them. Give or take.
4. Now with the back panel removed, remove the 2 wires connected to the
thermal fuse. The thermal fuse will most likely be white. It could be roundish or
just a flat bar shape. You will need an ohm meter to check the resistance of the
thermal fuse. If it is open(infinite resistance) then it has to be replaced. If it is
closed(no resistance) then return to the Dryers page of this site and look for
another cause of dryer failure.
5. If the thermal fuse was open then proceed to check vent and lint chute for
obstructions. Clean as needed.
6. Replace thermal fuse and thermostat.
7. Reassemble dryer and connect to vent. Check for proper exhaust outside
with dryer running.
Congratulations! You just saved a lot of money!
|Did this site save you an expensive service call? Please show thanks and......
KitchenAid Dryer Is Not Heating
Please remember that working on appliances can be dangerous. Appliances have many mechanical
and electrical parts that can cause serious injury and death. If you aren't familiar with these types of
applications then please call a qualified appliance technician. Lane Appliance LLC and this site
accept no responsibility for injuries to person or damage to appliances.